| Customization: | Available |
|---|---|
| Appearance: | Water |
| Application: | Concrete Admixture, Floor Hardener, Grouting Material, Mortar Admixture, Plastering Material, Self-Leveling Compound |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chemical Nature | SIDLEY PCE 154L is an environmentally friendly polycarboxylate high-performance water reducer. It adopts the principle of molecular structure design, based on the DLVO charge repulsion theory and steric hindrance effect theory. Under the action of initiators, unsaturated monomers are grafted onto the polymer main chain to form products with active functional side chains. This series of water reducing agents, due to their high water reduction rate, can significantly improve the plasticity index of fresh concrete, enhance the pumping performance and uniformity of concrete |
Typical Properties | Appearance White transparent liquid Solid Content 50±2%&60±2% PH 5±2 Density/(g/cm³) 1.05±0.05(25℃) Chlorine Content 0 |
Fields of application | *Precast concrete *Ready-mix concrete *Self-compacting concrete *High-strength concrete *High-performance concrete |
Application Features | *Super strong water-reducing effect (resulting in high density and strength of concrete) *Good slump retention ability *Extremely low alkali content (reduces alkali-aggregate reaction) *Improves shrinkage and creep performance *Improves the durability of concrete |
Usage Guidelines | * SIDLEY PCE 154L is a high solid content liquid and is not an end product for concrete production. When used, it should be combined with other polycarboxylate superplasticizers (such as PCE 156L, PCE 155L). The recommended composite ratio is: The mass ratio of polycarboxylate superplasticizer (PCE 156L/PCE 155L) to PCE 154L is 8:2 to 5:5. The recommended dosage of the diluted product is 0.2-0.5% (solid content) of the cement-based material, with a water reduction rate of 20- 35%. |
Compatibility | SIDLEY PCE 154L is compatible with all Portland cement and cement-based products. It is also compatible with all Sidleychem additives, such as defoamers, retarders, expansion agents, early strength agents, etc. |
Packaging | 220kg drum, ibc or Flexibag |
Storage Condition | *SIDLEY PCE 154L is non-toxic and non flammable, and can be transported in plastic drums or oil tankers. SIDLEY PCE 154L should be stored in a cool place to avoid long-term contact with steel products. The storage temperature should be between 0 ° C and 40 ° C. If stored below 0 ° C, freezing may occur. Heat the product until it melts and stir evenly before use. *The effective shelf life of this product is six months. If the product exceeds its shelf life, it can still be used |
Product Safety | According to the relevant laws and regulations on dangerous goods, this product is considered harmless. This product is non-toxic, non irritating, and non self igniting. |
Material Safety Data | All safety information can be found in the Material Safety Data Sheet (MSDS) for Polycarboxylate Superplasticizer. |
Transport Regulation | Not classified as a dangerous good under transport regulations. |
){kind=link}